Stacker stereoscopic warehouse

Lifting stacker also calls the stacker, is on the top shelf of working within the roadway lifting stacker, can greatly improve the efficiency of warehouse storage area and operation, is the main equipment of automatic warehouse. Stacker on market at present is mainly divided into single mast stacker and dual mast stacker. Stacker in three-dimensional storage channel is the main purpose of running back and forth, will be located in the throat of the goods in the goods shelves, or take delivery of the goods shipped to in throat.

Stacker structures: under the stacker is mainly composed of beams, cargo, cargo fork, columns, beams, organization level operation, the lifting mechanism, electric control cabinet, safety device and electrical control system etc. Several major components.

1, the main body structure

Stacking machine main body structure is mainly composed of beams, columns, beams and control cabinet of bearing. Upper and lower beam is welded by steel plate and steel boxes shaped structure, cross section performance is good, on either side of the beam under a running wheel axle hole in the ground boring and milling machine clamping processing is complete, make sure the main, driven wheel axis parallel, so as to improve the machine running stability; Pillar is made by steel, in the square steel tube welding two flat on both sides of a guide rail, guide rail surface hardening treatment, good abrasion resistance. Adopted with special equipment in the welding of automatic welding technology, effectively overcome the deformation of the structure; On beam welding on the pillar, column and the beam flange positioning, through using high strength bolt connection, the main structure has light weight, torsion, bending, high stiffness, strength, etc.

2, cargo

Cargo is through the lifting mechanism of power traction as part of vertical movement up and down, and the vertical frame and horizontal welding into l-shaped frame structure, the vertical framework used to install lifting roller and some safety protection devices. Horizontal frame is made of seamless steel tube, which can completely meet the requirements of cargo.

3, level of operation

Level of running mechanism is driven by power and the main composition of passive wheel, used for roadway in the direction of running the entire device.

4, hoisting mechanism

Lifting mechanism is composed of drive motor, drum, sliding set and wire rope, used to enhance cargo do vertical movement.

5, pallet fork institutions

Pallet fork expansion mechanism is driven by power and the upper, middle and under an organization composed of trigeminal, used to access goods direction perpendicular to the roadway. Fork under fixed in cargo platform, through the chain transmission between trigeminal do linear scaling.

6, guide wheel device

Stacker were adopted horizontal roller and lifting roller up and down three sets of roller device, level up and down roller installed on the upper and lower beam, respectively, used to guide horizontal motion along the direction of roadway stacker. Lifting roller installed on the loading stage, movement up and down the column guide rail, vertical orientation of cargo movement, at the same time through the idler pulley support load, and transmitted to the main structure.

www.hzliben.cn