In designing the automatic stereoscopic warehouse, main consideration is the inventory cost, efficiency, and three points. Harbin automated stereoscopic warehouse factory but sometimes the inventory demand is high, and the inefficient problems; Sometimes is the efficiency and cost. In addition, how to consider its applicability. The following is designing the automatic stereoscopic warehouse note points:

1, the basic data

The design is based on basic data. No matter what design, it doesn't make any sense to leave the basic data, also cannot judge of design. Many designers do not understand this, started drawing, the result will not solve the problem.

Basic data is important in the inventory, to collect shipments, scattered quantity, work time, SKU number, etc. Typically, these data with historical data or data as a reference. The more accurate data, the basis of a design more reasonable.

2, the load

Foundation bearing capacity, should be calculated in accordance with the specification, rather than a casual decision.

Shelf capacity: mechanical analysis with finite element method (fem), including earthquake load is very important.

3, -

Harbin automated stereoscopic warehouse factory floors is very simple, for a beginner is often prone to error. - including beam h1, h2, h3 goods pallets, access to space h4, safe space h5, in addition to the bottom height and top height. If there is no understanding of stacker, calculating the height is not an easy thing.

4, after the area before the library and the library area

The size of choice after the area before the library and the library area, to understand the structure of the stacker. If it is an inexperienced designers, can consult others' design. Correct understanding of the area before the library and the library area, and understand the requirements of the pit.

5, efficiency,

The efficiency of stacker can be calculated, FEM9.851 standard calculation method is presented. The efficiency of stacker is a major factor, but it's not easy to understand how to improve the efficiency. Some designers have no experience, often only focus on a certain index while ignoring other indicators. Sometimes calculation results are often unexpected.

6, delivery system

Conveyor as peripheral supporting facilities, the design is often more important than the automated multi-layered storehouse itself and complex, the difficulty is a few bigger. Conveyor technology has a lot of, in addition to the traditional conveyor, is now widely used and shuttle car, circular shuttle car, AGV, etc. Whatever the technology and equipment, all want to know about its applications and technical requirements.

The design of the conveyor system, consider the efficiency of the match. Sometimes, adopt what kind of transportation forms and conveying speed, for the efficiency of the transmission system has a great influence.

7, fire partition problem

Fire partition has a great influence to the design of automated multi-layered storehouse. For c class II material, with automatic spray partition area of 3000 square meters, and an automated stereoscopic warehouse its limit of 12000 square meters. This is why the three-dimensional library cannot be built one of the reasons.

There are a lot of automation stereoscopic warehouse design parameters. Design is important to balance and applicable. Every design index, balance is not some index is too high, too low. High indicators can cause waste, low indicators will affect the ability of the whole system. Is to use technology to apply appropriate, not for application and application. Designers in the early, to adapt to the situation of automatic stereo warehouse may not understand, appear many misuse.